Daewoo International DRP-7 Manual De Instrucciones página 10

● STOP/EJECT: to stop and eject the cassette.
● PAUSE: to interrupt recording or playback.
RADIO OPERATION
TUNING
 Switch Function Selector to "RADIO" to set unit to Radio mode.
 Select the tuning range with the BAND selector.
 Rotate TUNING CONTROL to select the desired station.
 Adjust Volume Control to obtain the desired listening level.
NOTE:
When listening to broadcasts it is advisable to extend fully the antenna on the top of unit, and to adjust the
position of the antenna for optimum reception.
CASSETTE DECK
Before operating the cassette deck, make sure Function Selector is in the TAPE mode.
PLAYBACK
Press Stop/Eject button to open the cassette door

 Place the cassette tape into Deck, with the side to be played facing the window.
Close cassette door and Press Play button to start playback.

 Playback stops when the tape reaches the end.
Press Stop/Eject button if you want to stop playback before the end of the tape.

 Press Stop/Eject button twice to open the cassette door.
RECORDING FROM RADIO / Microphone (built-in)
Push function button "RADIO" for recording from radio, or "TAPE" for recording from the built-in

microphone.
Place a blank tape into cassette deck.

 Press PAUSE button first and then Press PLAY and RECORD buttons together.
Play the selected sound source, to start recording, release PAUSE button.

SPECIFICATIONS
Description
AM/FM Radio Cassette Recorder
Power input
AC230V 50Hz
DC 6V (4x "D" type batteries)
Power consumption
5.5 W
Output power
800 MW
Unit Net weight
1.14 kg
Dimensions
285 (w) x 140 (d) x 135 (h) (mm)
Note: Design and specifications are subject to change without prior notice for the purpose of performance
improvement.
DRP-7
10