Mower _________________________
Check:
❏
Wheel lug torque:
❏
Front 100 - 120 ft lb (135-162 Nm)
❏
Rear 40 - 50 ft lb (54 - 68 Nm)
❏
Tire pressure should be:
❏
Front 16 - 20 psi (110 - 138 kPa)
❏
Rear 10 - 12 psi (69 - 83 kPa)
❏
Steering nut torque 30 - 40 ft. lb. (41 - 54 N.m)
❏
Traction pedal stop adjustment
❏
Traction does not creep with pedal in neutral
❏
Parking brake adjustment
❏
Operation of all switches
❏
Function of lift-lower levers
Engine _________________________
Check:
❏
Engine oil level
❏
Engine coolant level
❏
Air cleaner element and connections
❏
Fuel shut off solenoid linkage for adjustment and
alignment
❏
Belt adjustment
Cutting Units ___________________
Check:
❏
All hardware securely fastened
❏
Blades are in proper location (CW or CCW rotation)
❏
Blade Mounting Torque
❏
Centerbolt 75 ft lb (102 Nm)
❏
Adapter bolts 35 - 40 ft lb (47 - 54 Nm)
Support ___________________________________________________________
If you encounter any problems while setting up this
mower, contact contact the Jacobsen Customer Care
department.
Problem Description
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Dealer _____________________________________________ Inspected ____________________________
Customer _____________________________________________
Product No.____________________________________________
Pre-Delivery Checklist
Product No. 69166 - R-311 Rotary Mower
Product No. 69167 - R-311 Rotary Mower, EC
❏
Front Deck Level adjustment
❏
Decks pivot freely on mounting pins
❏
Adjust cutting height to customers' requirements
Electrical System _______________
Check:
❏
Interlock System (Section 4.2)
❏
Parking Brake switch
❏
PTO switch
❏
Seat switch
❏
Panel gauges and warning lights
❏
Mower Limit switch
❏
For pinched or rubbing wires
Hydraulic System _______________
Check:
❏
Hydraulic oil level
❏
For pinched or rubbing hoses
❏
For twisted or crimped hoses
❏
For oil leaks
❏
Tow Valve is in Drive position
Miscellaneous __________________
❏
Check for loose or missing hardware
❏
All lubrication points
❏
Examine paint finish; touch up where necessary
❏
Check decals. In place and legible
❏
Make sure Safety & Operation Manual and Parts &
Maintenance Manual are in the pouch
Jacobsen,
A Textron Comany
11108 Quality Drive
Charlotte, NC 28273
800-848-1636
http://www.Jacobsen.com
Date _________________________________
Serial No._____________________________