Drainage Method; Water Tank Drainage - Nemaxx BT25 Instrucciones De Uso Originales

KEN001BT25

WATER TANK DRAINAGE

NOTE
This device has a non-touch water switch, do not use it in strong magnetic
environment.
Please replace the bucket after pouring out water, or else device will auto start
after 3 minutes, water will flow inside the device and room.
EN
1. Hold the water bucket firmly, and then pull it out slowly.
2. Stop the device before taking out the bucket, because
water will keep dripping when device is running.
3. Push the water bucket smoothly, you'll hear "Ka".
The"on/off/standby" light will light up, device starts to
work.
If the Tank-full light is still on, maybe the bucket sensor
floater is locked.
Take out the bucket to make the floater reset, then push
the bucket back again.
9
Version: 5.0
28.08.2017