Clatronic EM 3191 Instrucciones De Servicio página 47

Preliminary Cleaning
Before using the device for the fi rst time you should clean it in order to remove any residues
from the production process. Please follow the instructions contained in the „Cleaning"
section.
Charging the Battery
The electric knife has two charging contacts on the sides.
• If you would like to charge up the device, place it in the charging station.
• The charging contacts are closed.
• Connect the mains adapter to a 230 V/50 Hz socket.
• The charging lamp lights up when contact has been made with the mains adapter.
•
•
•
NOTE:
•
•
• After the device has charged up please disconnect the mains adapter from the socket.
Combining the Blades
• Place the blade with the long slit on the blade with rivet.
• Guide the rivet along the large drill hole into the long slit.
• Push the rivet into the long slit. The blades will now stay together but can move in the
long slit.
Inserting Blades
• Hold the blades by the plastic (see illustration A).
• Guide the shaft of the blade into the blade shaft.
• The blades can be heard to lock into place.
05-EM 3191.indd 47 05-EM 3191.indd 47
WARNING: Use of Standard and Rechargeable Batteries
Only rechargeable batteries may be charged up with the mains adapter.
Do not replace rechargeable batteries with non-rechargeable ones.
There is a danger of explosion if you attempt to charge up non-rechargeable
batteries!
The lamp does not provide any information on the charge status of the battery.
The charging time the fi rst time the battery is charged is 16 hours and 8 hours for
each subsequent charge.
GB
47
27.09.2007 10:32:20 Uhr 27.09.2007 10:32:20 Uhr