Switching Off; Fault Elimination - HSM Profi Pack 425 Instrucciones De Servicio

4 Overview
1
4
1 Feed opening
2 Main switch
3 Caution label
4 Roller
5 Connection for suction device
Note:
The HSM Profi Pack 425 can also be
supplied with a built-in suction device.
Using a suction device (industrial vacuum
cleaner with a connection diameter
of 50 mm) you can extract dust while
processing the cardboard.
If your device does not have this apparatus,
you can fi t the components later when
needed. Your Profi Pack 425 is already
ready for this.
Profi Pack conversion kit:
Order number 1.531.200.000
Wet/dry suction:
Order number 1.531.200.030
8
5 Operation
Switching on
0
2
R I
3
Feeding cardboard boxes
5
4
• Cardboard boxes are processed up to a
width of 425 mm.
• Wider cardboard is automatically cut.

Switching off

0
R I

6 Fault elimination

0
R I
For all other malfunctions, check whether
the motor was overloaded before contacting
our customer service. Let the device cool
down for approx. 15 – 20 mins. before using
it again.
Profi Pack 425
english
• Set main switch to position „I".
 Cutting unit starts.
425 mm
• Set main switch to position „0".
 Cutting unit stops.
• To remove material when there`s
a fault, set the main switch to
position "R".
 Cutting unit moves backwards.
05/2016