Preparation For Installation - DELTACALOR Dinamic 1.0 Instrucciones De Uso

PREPARATION FOR INSTALLATION

Before connecting the heating appliance, disconnect the
power supply using the general switch.
This heating appliance is a class II appliance. As such, it may be in-
stalled in all rooms of the house, including in protection volumes 2
and 3 of a bathroom (IP44).
The heating appliance must be installed in such a way that the
switches and other control devices cannot be touched by some-
one in the bath or shower (in compliance with standard NF
C15-100).
The heating appliance must not be installed beneath a socket. The
heating appliance must be installed at least 15 cm away from all
obstacles (shelves, curtains, furniture, etc.).
The power circuit of this appliance must include an all-pole circuit
breaking device (in compliance with standard NF C15-100).
Volume
3
Volume
2
60 cm
60 cm
Volume
1
60 cm
[ 11 ]
15 cm MIN
A
60 cm MIN
B
[ EN ]