Set-Up Of The Receiving Tray; Paper Feeding - Hefter Systemform TF M-Serie Manual De Instrucciones

https://www.supplychimp.com
2. PREPARATION FOR USING THE FOLDER

2.3. Set-up of the receiving tray

Pull out the stacking drawer for the paper omit (tray) at the front of the machine (­
> photo 03
and 05). Adjust the position needed (stacking width) by moving the drawer
accordingly. No jam may occur (The scores at the side of the drawer help you to
find the correct stacking depth)!

2.4. Paper feeding

2.4.1 Paper feeding at the TF MINI plus (= one single feeding station, see photo 06)
Adjust both paper guides centred and
symmetric and with a minimal slack
to the paper width required.
To adjust the paper guides please squeeze
them along with the clamping lever.
NOTE: No jam will occur at the paper
guides, the paper needs a slack of ~0,5 mm!
Move the lever of the paper tray (right side)
downwards and position the paper so that it
touches the bottom neatly. Then release the
lever.
Example: For the set-up of the wrap fold (see point 3.4.1) feed the paper face up
and bottom first.
Tip: -
-
2.4.2 Paper feeding at the TF MULTI plus (= 3 feeding stations, see photo 07)
Adjust both paper guides of each feeding station
centred and symmetric and with a minimal slack
to the paper width required. Please use the scale
for that purpose. To adjust the paper guides
please squeeze them along with the clamping
lever.
NOTE: No jam will occur at the paper guide,
if you have a space of ~0,5 mm between the
paper an the guide.!
Move the lever of the paper tray (right side)
downwards and position the paper so that it
touches the bottom neatly. Then release the lever.
Fan the paper before you insert it!
Always make a test fold to check the fold!
Abb. 06
TF MINI plus
plus
Abb. 07 – TF MULTI
7