Remote Battery Installation; Assembly - Glaziar Total 2 Manual De Usuario

REMOTE BATTERY INSTALLATION

ASSEMBLY

ATTACHING BASE
ASSEMBLY (CONTINUE)
ATTACHING FANS
glaziar - total2 - VARIOS IDIOMAS.indd 15
1-Remove the battery compartment holder
from the back of the Remote Control.
2-Insert the battery (included, CR2025 (3v))
into the battery holder according to the
polarity indicators ("+" on top)
3-Close the battery holder cover.
1. Place the Base on the bottom of the
Fan Main Unit (see example at right).
2. Line-up the main unit with the base.
3. Insert and securely tighten the plastic nut
(included).
IMPORTANT:
Do not over tighten.
1. Place the fan on top of the main
unit, rotate clockwise to lock (see
example at bottom).
2. Repeat step 1 to stack up the
fans.
3. Angle of the each fan can be
adjusted.
4. Place the cap on the top of the
fan and rotate clockwise to lock.
5
08/01/2018 17:20:19