Personnel Qualifications; Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Consciousness On The Job; Safety Instructions For The Operator - Resol PSW Basic Manual De Uso

Ocultar thumbs Ver también para PSW Basic:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

NOTE:
Signal words:
DANGER!
Acutely dangerous situation.
Non-observance results in death or the most serious of injuries.
WARNING!
The user can suffer (serious) injuries. ‚Warning' implies that (serious) injury to
persons is probable if this information is disregarded.
CAUTION!
There is a risk of damaging the product/unit. ‚Caution' implies that damage to the
product is possible if this information is disregarded.
NOTE:
Useful information on handling the product. It draws attention to possible prob-
lems.
Information applied directly to the product, such as:
• Direction of rotation arrow,
• Identifiers for connections,
• Name plate,
• warning sticker, must be strictly compliant with and kept in a fully legible
condition.
4.2

Personnel qualifications

The installation, operating and maintenance personnel must have the appropriate
qualifications for this work. Area of responsibility, terms of reference and monitor-
ing of the personnel have to be ensured by the operator. If the personnel are not
in possession of the necessary knowledge, they have to be trained and instructed.
This can be accomplished if necessary by the manufacturer of the product at the
request of the operator.
4.3

Danger in the event of non-observance of the safety instructions

Non-observance of the safety instructions can result in risk of injury to persons
and damage to the environment and the product/unit. Non-observance of the
safety instructions results in the loss of any claims to damages.
In detail, non-observance can, for example, result in the following risks:
• Danger to persons from electrical, mechanical and bacteriological influences,
• Damage to the environment due to leakage of hazardous materials,
• Property damage,
• Failure of important product/unit functions,
• Failure of required maintenance and repair procedures.
4.4

Safety consciousness on the job

The safety instructions included in this installation and operating instructions, the
existing national regulations for accident prevention together with any internal
working, operating and safety regulations of the operator are to be compliant with.
4.5

Safety instructions for the operator

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, un-
less they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• If hot or cold components on the product/the unit lead to hazards, local meas-
ures must be taken to guard them against touching.
• Guards protecting against touching moving components (such as the coupling)
must not be removed whilst the product is in operation.
• Leakages (e.g. from a shaft seal) of hazardous fluids (e.g. explosive, toxic or hot)
must be led away so that no danger to persons or to the environment arises.
National statutory provisions are to be complied with.
• Danger from electrical current must be eliminated. Local directives or general
directives [e.g. IEC, VDE etc.] and local energy supply companies must be ad-
hered to.
• Faults of electronic devices due to electromagnetic fields Electromagnet-
ic fields are created during the operation of pumps with frequency convert-
er. Interference of electronic devices may be the result. The result may be a
device malfunction, which can result in damage to the health or even death,
e.g. of persons carrying implanted active or passive medical devices.
Therefore, during operation the presence of any persons e.g. with cardiac pace-
makers in the vicinity of the unit/pump should be prohibited. With magnetic or
electronic data media, the loss of data is possible.
19
Tabla de contenido
loading

Tabla de contenido