Haier H2F-220WSAA Instrucciones De Uso página 14

FUNCTIONS
7A
7
7B
8.1
A
8.2
A
13
7C
B
B
7A
A. Connect the signal line in the door decora-
7
tive strip to the terminal in the hinge.
Clear up the harness and place it into the
decorative strip cover.
B. Fix the decorative strip and buckle its small
cover on the right side.
C. Close the cabinet upper front cover.
7B
Insert the left and right small covers into the
groove.
Direction for handle replacement: according
8
to the different configurations (The figure is
different).
Assist handle:
8.1
A. Use a flat-headed screwdriver to prise off
the handle upper cover. Remove the two
A B
screws and then remove the handle.
B. Use a flat-headed screwdriver to pry off
the screw plug on the right of the door body.
Move the screw plug to the left side and plug
the screw hole. Fix the handle on the right
side and have it covered.
Ordinary handle:
8.2
A. Use a flat-headed screwdriver to prise off
the handle upper cover. Remove the two
screws and then remove the handle.
A
B. Use a flat-headed screwdriver to pry off
the screw plug on the right of the door body.
Move the screw plug to the left side and plug
the screw hole.
C. Fix the handle on the right side and have it
covered.
7C
B