Technical Assistance - Guarantee - Extel ITOUCH SER.R1 Instrucciones De Uso

9
OPTIONS
• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• Additional monitor: MN IRON
• 2nd roadside panel: PL ITOUCH
• Additional camera: CAM ITOUCH
10

TECHNICAL ASSISTANCE - GUARANTEE

Fault
• The monitor does not
switch on
• Bad quality image
And/or sound
• Rings permanently
• Image too bright
• Monitor or second inter-
com panel not working
• Screen frozen, impossible
to access the menu
Last version of the dowloadable manual in color on :
GUARANTEE CONDITIONS :
The guarantee does not cover: the consumables (batteries, etc.) and the damages caused by: misuse, improper
installation, external intervention, deterioration by mechanical or electrical shock, fall or atmospheric phenomenon.
• Never open the apparatus or the guarantee will be invalidated.
• For return in SAV, protect the screen to prevent scratching.
• Only ever clean with a soft cloth; never use solvents. Before cleaning, disconnect and switch off the system.
Caution : Do not use any acid or alcohol based or other similar cleaning product or solvent. You may damage
the appliance and the vapours are explosive and dangerous for your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other) for cleaning.
11GB
Possible cause
• The monitor is not power-
supplied
• The monitor is not connec-
ted to the fixing grid
• Environment
• Wiring
• Position of the camera
• Switch setting
• No system reset.
Software error
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69 (0,337€ttc/min)
This device is guaranteed for labour and parts in our premises.
CFI EXTEL ITOUCH SER.R1 - 05/2011 - V1
Solution
• Check polarity of the wires + and -
• Reconnect the connectors
• Check if the cables used have
adapted size and the connection cables of the
video door phone are not in the same sheath
as 230 V~ cables
• Check the dip switch (p. 7)
• Check the connection
wires are not reversed
• Do not expose the lens
of the camera to direct sun light or to reflec-
tive surface.
• Check the Dip switches (p.4).
• Disconnect from the power source for 30
seconds
Press the and
for one second. Then, wait 10 seconds
www.cfi-extel.com
keys simultaneously