The Connection Panel; Configuring The Pc To Connect To The Adsl Router - Topcom WEBR@CER 1104 Manual De Usuario

Topcom Wireless Webr@cer 1104

1. THE CONNECTION PANEL

ADSL
• POWER: The power port is to connect the 12V DC power adapter.
--> The power LED on the front panel will go ON when the power adapter is connected.
• ADSL: The ADSL port is to connect your ASDL PSTN line.
--> The DSL LED will go ON I when the ADSL link is established.
• Ports 1- 4 (10/100): This is to connect networked devices, such as PCs, ftp servers or anything else you want to
put on your network.
--> The LAN LED's will indicate the connection status.
• Reset Button: If you would like to load default settings, press the reset button and hold it for 5 ~ 6 seconds. It will
load the factory default settings for the device. Do not press the reset button unless you want to clear the current
data.
• Power Switch: Please set the power switch in the ON position to start the router.
2. CONFIGURING THE PC TO CONNECT TO THE ADSL
ROUTER
Remark
- The routers default IP address is: 192.168.1.1
- DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your PC to accept the IP address
that the router will provide.
1. Click Start button, select Settings, then Control Panel
2. Double-click the Network Icon
3. In the configuration windows, select the TCP/IP protocol line that has been associated with your network card/
adapter.
4
4 3
reset
10/100 AUTO-MDI/MDIX SWITCH
2 1
DC12V
Topcom Wireless Webr@cer 1104
ON