Installing Batteries; Turning The Camcorder On And Off - Coby Snapp CAM4505 Manual De Instrucciones

If your memory card has a write protec-
tion switch, make sure that the switch is
set to the "Unlock" position.

Installing Batteries

The camcorder requires three (3) "AAA" batter-
ies for operation.
1. Remove the battery compartment cover by
sliding it down toward the base of the camera.
2. Load three (3) "AAA" batteries
into the battery compartment.
Be sure to match the positive
and negative terminals of
the batteries to the markings
inside the battery compart-
ment.
3. Replace the battery com-
partment cover and slide it
up into place.
Page 10
The battery used in this device may
present a fire or chemical burn if mis-
treated. Do not disassemble, inciner-
ate, or heat the batteries. Used batter-
ies should be disposed of safely. Keep
batteries out of the reach of children.
Turning the Camcorder On and
Off
To turn the camcorder on, press and hold
POWER. The camcorder will automatically
check to see if a memory card has been loaded.
If the camcorder does not detect a memory
card, the LCD screen will prompt you to insert a
memory card.
To turn the camcorder off, press POWER.
Getting Started