Water Drainage - Midea MPM3-10CR-BB6 Manual De Instrucciones

OPERATING iNSTRUCTiONS
0 WATER DRAINAGE:
During dehumidifying mode:
- Remove the drain plug from the back of the unit,attach a section of drain hose (included with
this unit) to the hole. Place the open end of the hose directly over the drain area in your
basement floor or in a water container (see Fig.4 & 5).
- You can also install the drain connector (5/8" universal female mender) with 3/4" hose (locally
purchased by consumer) for garden hose use.
NOTE:
- When the water level of the bottom tray reaches a predetermined level, the unit beeps 8 times,
the digital display area shows "PI" and the unit stops operation. Carefully move the unit to a drain
location, remove the bottom drain plug and let the water drain away (Fig.6). Restart the machine
until the "PI" symbol disappears. If the error repeats, call for service.
Remove the / Continuous
drain plug drain hose
Fig.4 Fig.5 Fig.6