Protection Circuit - Pioneer XW-BTSP70 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16

Protection circuit

The protection circuit has worked if the power indicator is blinking red fast.
Switch the unit to standby then request repairs.
Resetting the unit to its default status
If the unit stops working properly, you may be able to restore correct
operation by resetting it to its default status. Turn the unit on, then press
and hold the
button for 10 seconds or more until the power indicator
goes out.
0 If you have enabled the TWS feature, reset both of the units.
Restarting
When the unit is not responding to operations, you may
be able to restore proper operation by restarting the
unit. Use the point of a pin or other similarly thin item
and push into the small hole (reset hole) to the left of
the AUDIO IN jack.
Specifications
∫ General
Power supply: AC 100 - 240 V, 50/60 Hz (Main unit: DC 5 V, 2.0 A) / Power
consumption (when using the AC adapter for recharging the main unit): 8 W, 5 W
(No-sound), 0.2 W (Stand-by) / Charging time: Approx. 4 hours / Battery operation
time: Approx. 5 hours / Dimensions (WkHkD): 180 mm k 53.5 mm k 59 mm /
Weight: 740 g / Audio inputs: Bluetooth, Analog AUDIO IN (stereo mini jack,
φ
3.5 mm)
∫ Speaker Section
Speakers used: 40 mm driver k 2
∫ Bluetooth Section
Bluetooth standard specification: Ver. 4.0 / Maximum communication range: 10 m
(Class 2) / Compatible Bluetooth profiles: A2DP / Supported Codecs: SBC, aptX
Supported content protection technology: SCMS-T / Maximum multi point devices: 2 /
Maximum multi pairing devices: 8 / TWS (True Wireless Stereo) supported
*
Specifications and features are subject to change without notice.
En
®
/
11
Tabla de contenido
loading

Tabla de contenido