Safety Information - Oase HeatControl Instrucciones De Uso

• Never immerse the unit
in water or other liq-
uids.
• Switch off all units in
the aquarium or dis-
connect
plugs of all units before
reaching into the wa-
ter.
• Disconnect the power
plug before carrying
out any work on the
unit.
• If a power connection
cable is damaged, have
it immediately replaced
by OASE, an authorised
customer service or a
qualified electrician to
prevent electric shock.
the power

SAFETY INFORMATION

• Never operate the unit if either the electrical
cables or the housing are defective!
• Do not carry or pull the unit by its electrical
cable.
• Route cables/hoses such that they are pro-
tected from damage and do not present a
tripping hazard.
• Only open the unit housing or its attendant
components, when this is explicitly required
in the operating instructions.
• Only carry out work on the unit that is de-
scribed in this manual. If problems cannot be
overcome, please contact an authorised cus-
tomer service point or, when in doubt, the
manufacturer.
• Only use original spare parts and accessories
for the unit.
• Never carry out technical modifications to the
unit.
• Only connect the unit if the electrical data of
the unit and the power supply coincide. The
unit data is to be found on the unit type plate,
on the packaging or in this manual.
- EN -
11