EN
GB
11. Tips on using the spray tanning system
Before commencing application, check that all necessary protective
measures (nasal plugs, safety goggles, hair covering) have been taken.
Practice on a large piece of cardboard or paper first of all in order to find the
i
optimal settings for the spray tanning lotion used.
•
Start and end the spray movement
outside the body.
•
Avoid interruptions during the spray
movement.
•
The spray movement should come
from the arm, not just from the wrist.
This ensures that a uniform distance is
maintained between the spray gun and
the body during the spray operation.
Select a distance of 10 - 20 cm, depending
on the desired spray jet width.
Fig. 7 a:
CORRECT Even distance
Fig. 7 b:
INCORRECT uneven distance
will result in uneven tanning
•
Move the spray gun at an even speed
•
When tanning is complete, switch off,
turbine and any tanning extraction fan (if
used) after fumes/mist have cleared.
12. After application of the spray tanning lotion
The full tanning effect develops during the first 6-12 hours after the treatment.
i
•
Allow the spray tanning lotion to dry for
10-15 minutes before getting dressed
again.
You can also use the warm air from
i
the air hose to accelerate the drying
process of the spray tanning lotion.
To do this, simply remove the spray
gun from the air hose and switch
the system on.
•
DO NOT shower or bathe in the first 6-8
hours after application as this will affect
the tanning result.
8
Spray Tanning System
Spray Tanning System
Spray Tanning System
7
10-20 cm
a
b
ü