Assembly Instructions - Tunturi platinum 8610 Manual Del Usario

Assembly instructions

Step 1: Upright Tubes
1. The right side upright tube (19) has the computer
cable (A) pre-installed. Lift the tube off the walking
surface and attach it to the base frame. You need
to gently pull on the computer cable as you line up
the upright tube, taking the slack out, so the cable
does not get pinched between the tube and the base
frame. Assemble one 3/8" x 3-3/4" Button Head
Socket bolt (104), 3/8" split washer (58) and 3/8"
1.
fl at washer (59) through the top hole in the retai-
ning plate (20), and corresponding top hole in the
upright tube, and screw into the base frame. Now
install the other two bolts (104) and washers (58
& 59) and tighten all three securely.
2. Install the left upright (18) in the same manner.
3. Install the lower side caps (32 & 33) with four M5
x 12mm Phillips Head screws (73).
Treadmill
5