Taking The Microscope Into Use; Utilisation With Table Stand (Model 33213) - Eschenbach 33213 Instrucciones De Uso

Taking the microscope into use

Utilisation with table stand
In the variant with a table stand the appliance is largely pre-assembled.
• Move the microscope head a few centimetres upwards with the gear
wheel t.
• Loosen the setscrew for the microscope head
head so that the eyepieces are directed towards you. Then tighten them
back up.
• Place the two eyepiece cups
• Unscrew the protective cap of the lens barrel
• Look through the two eyepieces
eye spacing by turning the eyepiece bearer o either inwards or outwards.
• For the individual optimal contrast select either the black or the white side
of the object bearer disc h.
• To secure the disc, turn the setscrew
• Place the object that is to be examined by microscope on the object bearer
disc.
• With largish objects that are to be observed or processed, the spacing-
adjustment using the lateral gear wheels may not be sufficient. In this
case, you should first of all carry out a rough distance adjustment by
using the securing wheel (u, Model 33213). For this, orientate yourself
on the following table:
• Select the required magnification (1x or 2x) by turning the lens barrel
through 90° for each.
(Model 33213)
i onto the eyepieces.
q. Adjust the eyepiece spacing to your
j until it is hand-tight.
- 18 -
e and turn the microscope
r anti-clockwise.