Scorpius-A
FOLDING / UNFOLDING YOUR SCOOTER
Folding / unfolding your scooter only when the scooter is under below circumstances:
•
When the scooter is placed on a flat ground and in a lay down position.
•
When the scooter is switched off and on standby for folding / unfolding, the folding / unfolding light
indicator (M) on the scooter will be orange. (Figure 23)
•
When the seatback is flipped down.
Folding / Unfolding Buttons
•
Buttons on scooter (Figure 23)
-
Press folding button (N) once to auto-fold. Please make sure
the scooter is fully expanded before folding.
-
Press unfolding button (O) once to auto-unfold. Please make
sure the scooter is fully folded before unfolding.
-
Press (N) / (O) again to fold / unfold if folding / unfolding
process is interrupted.
•
Buttons on remote (Figure 24)
- Press folding button (P) once to auto-fold. Please make sure
the scooter is fully expanded before folding.
- Press unfolding button (Q) to auto-unfold. Please make sure
the scooter is fully folded before unfolding.
- Press (P) / (Q) again to fold / unfold if folding / unfolding
process is interrupted.
•
The remote is not designed to be water-proof. Please keep it away from humid environment.
•
Do not press the folding / unfolding button more than one time continuously on the remote
control.
•
Best transmit range of remote is within 10 m. (The reading range will be affected by the
environment, barriers, and weather).
•
The scooter may not be folded / unfolded if the battery is low. Please re-charge the scooter by
upper tiller charging port immediately and operate the folding / unfolding later when the scooter
is fully charged. See section 6-4.
•
Keep the remote safe. Please contact dealer if it gets lost.
How to wake up the folding / unfolding function:
•
The folding / unfolding buttons will power off if no action is detected in 3 minutes.
•
Please wake up the folding / unfolding function before folding / unfolding. There are 3 ways:
1. Press power switch button and turn off the power.
2. Press and hold the folding button (N) or unfolding button (O) on scooter for 3 seconds to wake up the
folding / unfolding function. The light indicator (M) will be orange. To turn off the folding / unfolding
function, press and hold the folding button (N) or unfolding button (O) on scooter for 3 seconds again.
3. Press and hold the folding button (P) or unfolding button (Q) on scooter for 5 seconds to wake up the
folding / unfolding function. To turn off the folding / unfolding function, press and hold the folding
button (N) or unfolding button (O) on scooter for 5 seconds again.
How to fold the scooter (Figure 25):
1. Turn off the power.
2. Flip down the seatback.
3. Press folding button on the remote or on scooter once to auto-fold the scooter. The seat will
automatically move backwards during folding.
4. The seat latches will automatically release, and the seat will move backwards.
1656610~B
Instruction Booklet
(M)
(N)
(O)
Figure 23
Figure 24
(P)
(Q)
16