Description; Technical Data - Hilti PMA 31 Manual De Instrucciones

Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
en

2 Description

2.1 Use of the product as directed
The Hilti PMA 31 laser receiver is designed to detect the
laser beams from the PMC 46 or PML 42 line lasers.
The tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Modification of the tool or tampering with its parts is
not permissible.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.

3 Technical data

Right of technical changes reserved.
Operating range (diameter)
Audible signal generator
Laser plane display range (10m)
Liquid crystal display
Receiving window
Center indication from top edge of casing
Marking notch (center)
Receiver automatic power-off
Dimensions
Weight
Power supply
Battery life
Operating temperature range
Storage temperature
Protection class
8
Type:
Generation: 04
Serial no.:
Take the influences of the surrounding area into account.
Do not use the tool where there is a risk of fire or
explosion.
2.2 Items supplied with the laser receiver
1 Laser receiver
1 Operating instructions
2 Batteries
1 Manufacturer's certificate
2...30 m (6 to 100 ft)
2 volume levels plus mute setting
±1 mm (0.4 in)
Front
120 mm (5 in)
75 mm (3 in)
On both sides
When no beam is detected : 30 min
160 mm X 67 mm X 27 mm (6.5" x 2.6" x 0.9")
Including battery: 0.25 kg (0.6 lbs)
AA‑size cells: 2
Alkaline batteries, Temperature +20°C (+68°F): 50 h
-20...+50°C (-4 to 122°F)
-30...+60°C (-22 to 140°F)
IP 56
in accordance with IEC 529