Triton Blue 14 LED 3W RGB 3 IN 1 IP 65 Manual De Usuario página 23

MODE CHANNEL
HSV 1
2
3
MODE CHANNEL
ARC.1 1
2
3
AR1.d 1
2
3
4
AR1.s 1
2
3
4
5
DMX Primer
There are 512 channels in a DMX-512 connection. Channels may be assigned in any
capable of receiving DMX 512 will require one or a number of sequential channels. The user must assign a
starting address on the fixture that indicates the first
different types of DMX controllable
Choosing a start address should be planned in advance. Channels should never overlap. if they do, this
r
will esult in erratic operation of the fixtures whose starting address is set incorrectly. You can
control multiple fixtures of the same type using the same starting address as long
that of unison movement or operation, in other words, the fixtures will be slaved together and all respond
exactly the same.
DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is
where the DATA OUT of one fixture connects to the DATA IN of the next
fixtures are connected is not important and has no effect on
Use an order that provides for the easiest and most direct cabling. Connect fixtures using shielded two
conductor twisted pair cable
while pin 2 is D ata Negative (S-) and pin 3 is Data positive (S+).
User Manual | SIRIUS 14 LED 3W RGB 3 IN 1 IP 65 | Triton Blue | Rev.Jan. 2014 | www.triton-blue.com
VALUE FUNCTION
0-255 RED
0-255 GREEN
0-255 BLUE
VALUE FUNCTION
0-255 RED
0-255
GREEN
0-255 BLUE
0-255 DIMMER
0-255 RED
0-255 GREEN
0-255 BLUE
0-255 DIMMER
0-255 RED
0-255 GREEN
0-255 BLUE
0--255 STROBE
f ixtures and they all may vary in the total number of channels required.
w ith three pin XLR male to female connectors. The shield connection is pin 1,
channel reserved in the controller. There are many
fixture. The order in which the
h ow a controller communicates to each fixture.
manner. A fixture
however,
a s the intended result is