Alesis FUSION 6HD Manual De Inicio Rápido Para El Usuario página 33

Creating your own song...
These steps have largely been covered earlier in this section of the Quickstart guide. But to
summarize, let's take the following steps together...
If you have exited Song mode, go ahead and re-enter Song mode. Your screen should look
like the one below:
Press the EDIT button to take you "under the hood" of Song mode and then select the Utility
tab on the lower left of the display. Your display will then look like the one below:
1. Press the New Song button on the upper right. A new song is created and the display takes
you to a screen that looks very similar to the one below:
2. Use the PREV and NEXT buttons to highlight "Grand Piano" or "A-1 (000)." "ROM:Preset 1"
selects the bank under which you are looking for sounds, whereas the "A-1 (000)" lets you
cycle through the individual sounds contained within the selected bank.
3. Use the Control Wheel (or INC/DEC buttons) to select an instrument you want to play.
4. Press the SONG mode button once again to return you to the top level of Song mode.
5. Press PLAY and RECORD simultaneously to start recording. Once you do this, the RECORD
button will turn red, the song will start playing along with a metronome, and you will be
recording. Play whatever you'd like on the keyboard and press stop when you're finished.
Your new track is now a recorded part of the Fusion's sequencer data. You can repeat this
process (see the section Recording Tracks...New Track) to add subsequent parts to your
song.
31