York EADC-09FSAAR Instrucciones De Instalación página 68

(9) Display
Running icon and mode display
the unit is
turning on
running
button
unit, setting
malfunction
(10) PG motor locked-rotor protection
protection locked is displayed If the unit is at ON status, the dual 8 nixietube will display the locked error code H6; If the unit is
at OFF status, it won't display the information of locked malfunction.
(11) Power-off memory protection
Memory content includes mode, up&down swing, light, setting temp. and setting fan speed.Upon power failure, the unit will automa-
tically start to run according to memory content after power recovery. If the last remote-control command without timer setting,the
system will memorize the last remote-control signal and runs according to it. If the last remote controller command has general timer
function and the system is de-energized before setting time, the system will memorize the last timer function in remote controller co-
mmand after re-energization and time will be recalculated. If there is timer function in the last remote controller command but setting
time has reached, the system will act as timer on/off setting before de-energization. After re-energization, the system memorizes the
running states before power failure without timer action. Clock timer can not be memorized.
608
icon
unit ler
turned off
setting temperature display is set by
it will turn back to display the
ed
's running speed is slow for a period of time. I
(0 degree)
icon
icon displayed
standby
icon setting
ying turned off
automatic
ck.