VITO PRO-POWER VIBSFL18 Manual De Instrucciones página 12

EN
BATTERY
Fig. 2
1
3
2
1. To insert the battery (3).
2. To remove the battery, press (1)
and push (2).
Always disconnect the tool before
inserting or removing the battery.
During the charge, the charger /
battery assembly may be a little hot.
This is normal and does not indicate
any anomaly.
If the battery to be charged is hot,
it should be cooled before charging
it (fig. 9).
OPERATING
INSTRUCTIONS
Fig. 3a
Fig. 3b
12
1. To open the chuck, rotate anti-
clockwise (3a).
2. To tighten accessories on the
chuck, rotate clockwise (3b).
Fig. 4a
Fig. 4b
1. To start, press switch (4a).
2. To stop, release the switch (4b).
Fig. 5
To increase or decrease rotation,
press / release the switch.
Fig. 6
To select speed 1 or
Fig. 7
2 .
Press the rotation direction selector
for right or left, to invert the
direction of rotation.
Fig. 8
1
2
3
1. Screw with low torque.
2. Screw with hihg torque.
3. Drilling stone, walls.