TECshow NEBULA 18 Manual De Usuario página 5

DMX Address
Channel Mode
Slave Mode
Show Mode
Fade Speed
Color Select
Manual Color
Strobe
Sound Sense
Back Light
DisplayInvert
Balance Setup
Language Setup
Temperature
Auto Test
DMX Mode
Select the Addr menu, press the Enter key to con-
firm. Then use the initial address code Down/Up
button to set this light (A001-A512). Once you have
set your initial address code, press Enter to define
and save. Not to make any changes, wait a minute
to automatically exit the menu and save. To main
menu, please press the Menu button.
Channel selection model
Select the Chnd menu, press the Enter key to deter-
mine. To use the Down/Up button to channel mode:
8CH (8 Channel), 11CH (11 Channels) mode. Select
the desired channel mode, press Enter to determine
001 - 512
8Ch - 11Ch
Master - Slave
Auto
Sound
Speed1 - Speed 10 000 - 225
Color1 - Color33 000 - 225
Red 000 - 225
Green 000 - 225
Blue 000 - 225
White 000 - 225
Y 000 - 225
P 000 - 225
000 - 225 (Same channel)
0 - 100
On-Off
Yes-No
Red 125 - 255
Green 125 - 255
Blue 125 - 255
English - Chinese
Jump Change color
Sound control jump color, no
run gradient effect
Gradient Speed
N kinds of color
Manual setting
Color patterns play role
Sound control sensitivity
Back light outo turn off
Positive and backward display
White balance setting
Language setting
Temperature display
Automatic testing
and save. Not to make any changes, wait a minute
to automatically exit the menu and save. To man
menu, please press the Menu button.
Master/Slave mode
Select the SLnd menu, press the Enter key to con-
firm. To use the Down/Up key set of Master-Slave
mode need: NAST master .SL1 (Slave 1). SL2 (Slave
2). SL3 (Slave 3). SL4 (Slave 4). Select the desired
mode, press Enter to determine and save. Not to
make any changes, wait a minute to automatical-
ly exit the menu and save. To main menu, please
press the Menu button.
P. 5
| Tecshow Nebula 18
English version