TECshow RAZOR CUBE Manual De Usuario página 6

DMX address setting
Choose the DMX address, press the ENTER button to confirm,
the current address will blink Display. Use the UP and DOWN
buttons to adjust the address from 1 to 512. When address is
selected, press ENTER button. Press MENU button, in about
5 seconds the new address will be saved and you´ll return to
the main menu.
DMX channel selection mode
Select the Channel set mode, press the ENTER button to con-
firm that the current address will blink Display. Use the UP/
DOWN buttons to adjust channel model, CH1, CH16, CH48
have three channel modes. Choose one of them channel
mode, press the ENTER button set, without any function
changes press the menu button again, about 5 seconds will
save your address and return to the main menu
Performance mode
Select Show Mode, press the ENTER button to confirm that
the current address will blink Display. Use the UP/DOWN but-
tons to adjust performance mode. Show1, Show2, Show3,
Show4 four patterns. Choose one of them, press ENTER but-
ton to set, without any function change press the button
again, about 5 seconds will save your address and return to
the main menu.
Master/Slave machine mode
Choose Slave Set mode, press the ENTER button to con-
firm that the current address will blink Display. Use the UP/
DOWN buttons to adjust master/slave modes. Slav1, Slav2
two modes. Choose one of them, press ENTER button to set,
without any function change press the button again, about 5
seconds will save your address and return to the main menu.
Standby mode
Choose Black Out mode,press the ENTER button to confirm
that the current address will blink Display. Use the UP/DOWN
buttons to adjust the standby mode. Choose good after open
or close, press ENTER button to set, without any function
change press the button again, about 5 seconds will save
your address and return to the main menu.
Sound control mode
Select sound mode, press the ENTER button to confirm that
the current address will blink Display. Use the UP/DOWN but-
tons to adjust acoustic mode, on or off. Choose good after
open or close, press ENTER button to set, without any func-
RAZOR CUBE - LED MOVING HEAD MATRIX LIGHT
ENGLISH VERSION
tion change press the button again, about 5 seconds will save
your address and return to the main menu.
Acoustic sensitivity
Choose Sound Sense mode, press the ENTER button to con-
firm that the current address will blink Display. Use the UP/
DOWN buttons to adjust the acoustic sensitivity from 0 to 100.
Choose good after open or close, press ENTER button to set,
without any function change press the button again, about 5
seconds will save your address and return to the main menu.
X avis reverse
Choose Pan inverse mode, press the ENTER button to con-
firm that the current address will link Display. Use the UP/
DOWN buttons to adjust X avis reverse rotation, Yes or No.
Choose the one you need, press ENTER button to set, without
any function change press the button again, about 5 seconds
will save your address and return to the main menu.
X avis reverse
Choose Pan inverse mode, press the ENTER button to con-
firm that the current address will link Display. Use the UP/
DOWN buttons to adjust Y avis reverse rotation, Yes or No.
Choose the one you need, press ENTER button to set, without
any function change press the button again, about 5 seconds
will save your address and return to the main menu.
Display backlight mode
Choose the Back LCD light mode, press the ENTER button to
confirm that the current address will blink Display. Use the
UP/DOWN buttons to adjust backlight on or off. Choose good
after open or close, press ENTER button to set, without any
function change press the button again, about 5 seconds will
save your address and return to the main menu.
White balance mode
Choose the White Balance mode, press the ENTER button to
confirm that the current address will blink Display. Use the
UP/DOWN buttons to adjust the white balance mode. Red
0-255, Green 0-255, Blue 0-255 three manually adjust the
lamp bead brightness. Choose the brightness you need, press
ENTER button to set, without any function change press the
button again, about 5 seconds will save your address and re-
turn to the main menu.
Self-inspection mode
Choose Fixture Test mode, press the ENTER button to con-
p. 6