General Description; First Use - Beper 90.497R Manual De Instrucciones

Waffle Maker Use instructions

GENERAL DESCRIPTION

1 ­ Operation indicator (red light)
2 ­ Temperature­Thermostat Light (light green)
3 – Cord winder
4 ­ Hook closure
5 ­ Power Cable
6 ­ Top Plate
7 ­ Bottom plate
ATTENTION: do not cover the appliance when it is operating to avoid the risk of fires.
(*) Competent qualified electrician: after­sales department of the producer or importer or any person
who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this electrician.

FIRST USE

During the first use, the non­stick coated baking plates could produce some smoke; this is NOT
harmful, it is normal and will disappear after a short time. Before the first use, we advise you to clean
the baking plates with a soft damp cloth and to operate the appliance for 10 minutes without food.
USE
1. Insert the plug in the power socket, the pilot light will come on to indicate that the ap pliance is
switched on.
2. The appliance starts to preheat; when the cooking temperature is reached, then the ready light
will come on and the waffles maker is ready for use.
3. Fully open the waffles maker. Place the waffles you prepared on the baking plate.
4. Close the appliance and check the food during the cooking process.
5. Your waffles will be toasted in 2 to 3 min or longer to suit your taste. Open the waffles maker and
remove the waffles using a plastic or wooden spatula. Never use a metal knife as this may damage
the non­stick coating.
10