Operation; Using The Stroller; Using The Parking Brake; Using The Front Wheel Swivel Lock - Britax B-READY Guia Del Usuario

Operation

Using the Stroller

Folding the Stroller
IMPORTANT:
• Always apply brake and remove children before folding the stroller.
• Keep both hands on the stroller handle until the chassis lock fully engages.
1. Pull up both frame release levers
located just below the stroller handle,
and step back while guiding stroller
downward.
2. Continue folding until the chassis lock
engages.
NOTE: You may need to compress the
frame to engage the chassis lock.
NOTE: Ensure the chassis lock is
engaged when stroller is stored.
Unfolding the Stroller
1. Push the release on the chassis lock
and open the frame.
12
2. Lift the handle until frame locks into
upright position.

Using the Parking Brake

1. To engage, step on the brake pedal
until the indicator window changes to
red.
NOTE: Pressing the brake locks both
back wheels.
After setting the brake, check
NOTE:
that the brake is set properly by
attempting to roll the stroller forward
and backward. If the stroller will not
roll, the brake is set properly.
2. To disengage, step on the brake pedal
until the indicator window changes to
green.

Using the Front Wheel Swivel Lock

1. Move the wheel lock on the back of the
front wheel housing up or down. Down
will lock wheels inline with stroller and
up will allow wheels to swivel.
NOTE: You may need to swivel the
wheels to the proper position to
engage the swivel lock.
13