Booster To Harness Mode: Restoring The Harness And Buckle - Britax FRONTIER Guia Del Usuario

Switching Between Modes
Place the seat cover and foam
7
back in their original position
and attach the retaining clips.
Close the CLICKTIGHT.
8
* A click confirms the
CLICKTIGHT is secure.
Raise the head restraint to the
9
highest position.
Tuck each harness strap
10
under the side wing covers.
* Fold the harness straps to
remove any additional slack
before tucking underneath the
bib.
* Slide the comfort pads, chest
pads, chest clip and buckle
tongues to the top of the
harness strap before folding.
Tuck the harness straps
11
behind the head restraint bib.
30
TRUE SIDE IMPACT
PROTECTION

Booster to Harness Mode: Restoring the Harness and Buckle

Open the CLICKTIGHT.
1
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
Unhook the retaining clips at
2
the back of the seat cover. Pull
the seat cover and foam insert
forward.
Pull the EZ-Buckle belly pad
3
through the slot in the seat
cover.
* Choose the slot that is closest
to, but not under your child
Place the seat cover and foam
4
insert back to their original
position and attach the
retaining clips.
Close the CLICKTIGHT.
5
* A click confirms the
CLICKTIGHT is secure.
Remove the harness straps
6
from behind the side wing
covers.
Switching Between Modes
31