Activate/Deactivate The Collar - Num'axes CANICALM EXCEL Manual De Instrucciones

Activate/Deactivate the collar


Ø
Activate: move the magnetic key towards the collar so that it comes into contact with the red
mark, hold for 1 second (See Diagram 3). A Beep sound will be emitted and the indicator light
will flash in red (1 flash every 5 seconds) indicating that the collar has been switched on.
Ø
Deactivate: move the magnetic key towards the collar so that it comes into contact with the red
mark, hold for 1 second (See Diagram 3). Three beep sounds will be emitted and the indicator
light will go from flashing red to permanent red and then off indicating the collar has been
switched off.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for
a long period.
Diagram 3
Activate/deactivate the collar
with the magnetic key
Operation

After being activated, the collar remains on standby for 1 minute to allow you time to fix the
collar on your dog. At the first bark, a beep sound is emitted. If another bark is detected within
30 seconds, another beep sound is emitted together with a static stimulation (light, progressive or
strong stimulation according to the selected operating mode). Inhibition of any further stimulation is
dependant on the absence of any barking within the next 30 seconds.
If your dog stops barking during 30 seconds, at the next bark, the collar will start its operating cycle
from the beginning (beep sounds only).
The stimulation function can be inhibited selecting operating mode Nr 1. In this case, only beep
sounds will be emitted.
After being activated 5 times in quick succession, the collar will automatically go into safety mode
for 2 minutes before restarting itself normally.
Gb - 15
Magnetic key