Place Of Installation; Ir Remote Control - Vision TECHCONNECT AMPLIFIER2 Manual De Usuario

USe onlY domeSTic ac oUTleTS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
handle The poWer cord WiTh care
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the
plug itself. Pulling the cord may damage it. If you do not intend to use your unit for
any considerable length of time, unplug the unit. Do not place furniture or other heavy
objects on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot
in the power cord. Not only could the cord be damaged, but a short circuit could also
be caused with a consequent fire hazard.

place of inSTallaTion

Avoid installing your unit under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not obstruct the ventilation slots of the unit by placing objects next to them.
Otherwise, the temperature inside the unit may rise, possibly affecting its long-term
reliability. Do not expose the amplifier to dripping or splashing. Do not place objects
filled with liquids on or near the amplifier.
movinG The UniT
Before moving the unit, be sure to pull out the power cord from the AC outlet and
disconnect the interconnection cords with other units.
WarninG SiGnS
If you detect an abnormal smell or smoke, turn off the amplifier immediately and
unplug the power cord. Contact your dealer or nearest Vision service centre.
packaGinG
Save all packing material. It is essential for shipping in the event the unit ever
needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE
CENTRE, DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
2
fronT and rear conTrol panelS
1. LED Volume Indicator
2 / 8. IR receiver
3 / 9. Input 1
4. Volume Down
5. Power Switch /Input Selector

ir remoTe conTrol

1. Input 1
2. Volume Up
3. Mute
4. Input 2
5. Power On
6. Power Off
7. Volume Down
6. Volume Up
7. Power Socket
10. Right Speaker Output
11. Left Speaker Output
12. Input 2
3