Functions:
1.
2.
3.
4.
Charging the headset:
1. Plug the USB charger into the socket on the side of the headset. The red indicator light turns on when the battery is
charging. It may take up to 1 minute before the light turns on. When the battery is fully charged, the red indicator will
turn off automatically.
2. Unplug the USB charger from the headset.
NOTE:
-
You cannot use the headset while the battery is charging.
-
Charge the battery for eight hours before you use the headset for the first time.
-
Normal charging time is 2 hours.
Turning the headset on/off
•
To turn the headset on, press and hold the multifunctional button until the indicator light flashes blue and red. Then,
release the button.
•
To turn your headset off, press and hold the multifunctional button until the indicator light flashes rapidly. After you
release the button the headset will turn off.
NOTE: After 10 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.
Installation of the headset on a PS3
®
®
The PS3
Bluetooth
function is turned off by default. To use the headset on the PS3
®
1. Turn on your PS3
and go to the settings menu.
2. Select "Peripheral device settings" and go to "Register Bluetooth
3. Then select "Register headset" and let the PS3
4. Switch your headset to pairing mode by pressing the multifunctional button for 6 seconds. The blue/red indicator
flashes in sequence until the headset pairs with your PS3
5. Select the headset from the PS3
6. Then go to "Settings for audio device" in the settings menu.
7. Go to "Input device" and select the headset.
8. Go to "Output device" and select "Standard device".
9. Select "Confirm" and the headset is ready for use.
NOTE: When the headset is successfully paired with your PS3
light indicator flashing.
Test and use the headset:
®
Your PS3
and headset are now paired and the headset is ready to use in on-line games. To confirm they are operating
properly:
ENGLISH
Earhook
Speaker
Volume up button
Volume down button
®
:
®
search for devices.
®
menu, enter the password: "0000" and confirm.
5. Multifunctional button
6. Charging socket
7. Indicator light
8. Microphone
®
follow the steps below:
®
device".
®
.
®
, the blue light indicator lights up steadily without the red
2
G
1
2
N
C
Y
1
2
3
4
C
N
y
y