TFK dot Instrucciones De Uso página 10

-(Pic.VI) The seat cover can be adjusted into sleeping position, when
opening the zippers (9) left and right on the backrest. To bring the
backrest in the upright position again, just close the zippers (9) again.
-(Pic.VII) To engage the brake push the red lever ( 10) downwards. To
release the brake, push the green lever (11) downwards.
-(Pic.VIII) The hood is attached to the frame with two sliding parts(12).
Additionally, the backside of the hood can be fixed with two push
buttons on the backrest.
-(Pic.IX)To close the buckle of the safety belt ( 15) push both
endpieces ( 14 u.16) into the buckle (15) until it locks with a click. To
open it again, push the buckle knob in the middle ( 15). The five
separate belts can be adjusted with the tightening buckles a,b, and
c, to fit the size of the child. The belt is fixed on the five points a,b,c.
Transport
-(PIC X) When the stroller was folded, it can be carried on the special
grip (17)
-(PIC XI) To assemble a Group 0 Carseat, release first the bumper bar
as described under pic.5, and then push the adapter in the hub of
the bumper bar until it locks securely. The Group 0 seat can now be
adapted from the top to the adapters (18)
In order to fold the buggy again, the adapters must be taken of first!
(Pic.XI shows adapter for MaxiCosi)
Adaptersets are available for the following brands:
Maxi Cosi ( Pebble, Citi, Cabrio Fix) Cybex ( Aton), BeSafe (IziGo)
Römer ( Baby Safe+)
Recaro( Young Profi Plus) and Stochenmühle ( Twin 0+)
-(Pic XII) Buggy complete.