Power Supply; Dab Mode - GPO PR200 Manual Del Usuario

POWER SUPPLY

This unit is designed to operate on a normal AC 100V ~ 240V, 50/60
Hz household power supply. Do not attempt to operate the system
using other power sources. This may result in damage to the unit and
void your warranty.

DAB MODE

Getting started
1. Press the
2. Press the Function
control.
3. Fully Extend antenna on the back of your radio to get maximum
signal.
4. It will automatically scan for DAB radio stations. LCD Display will
show the scanning progress and the number of stations found. It
may take 2-3 minutes to finish, after all stations are stored, radio
will select the first station & adjust the volume to play.
If DAB signal or desired station is not found, reception signal may be
poor. Please relocate your radio & tune the radio again.
5. Press
6. Presset Enter (9) to confirm what you choose to play
7. Press Memory (15) for 3 seconds to store station function & Enter
(9) to confirm the Memory stored
12
GPO PR200_user_Manual EU - Oct 2017.indd 12
Power button (2) by remote control to turn the unit on.
(4) to enter DAB /FM Tuner by remote
or to select the station you would like to listen.
26/10/2017 10:07