Beper BT.100B Manual De Instrucciones página 7

Toaster Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
DESCRIPTION Fig.A
1. Slots
2. On button
3. Manual timer dial 6 positions
USE
Insert pieces of bread in the sandwich slots.
Plug the cord supply (5) into the socket.
Turn on the manual timer dial (3) and choose time and toasting level desired between 6 levels.
Let the button (2) down and the toaster start working, it will stop automatically when the timer is over, bread will
rise automatically.
If bread is not enough toasted, select higher toasting level, or if it is too much toasted, select lower one. The
toasting can be stopped when needed pressing the off button (4); the sandwich will automatically rise from the
slots (1).
FOR BETTER TOASTING
When used for the first time, do not put bread into the toaster; that will allow to the heat resistance to pre-heat
and to eliminate the smell of "new" . To get better results, use same thickness, size and freshness piece of bre-
ad. Do not put food that could make juice or other, in order to prevent from damages or fire and make it hard to
clean. The slide-out crumb tray (6) must always be cleaned after each use. To get homogeneous toasting, it is
recommended to wait at least 30 seconds for toasting again to reset the commands.
CLEANING AND CARE OF THE TOASTER
Always unplug the cord supply (5) from the socket before cleaning or care. Let the toaster to cool. The external
part of the toaster can be cleaned with a smooth cloth. Do not use alcohol, abrasive detergents or every deter-
gent that could damage the toaster. Do not immerse into water. After use, unplug the cord supply from the socket
and let the toaster to cool. If there remain embedded pieces of bread, unplug the cord supply from the socket,
turn over and slightly shake the toaster. Do never touch the parts of the toaster with cutting utensils, especially
inside the slots (1).
4. Off button
5. Cord supply
6. Removable crumb tray
7
EN