Sears Kenmore 253.6081 Serie Manual De Uso Y Cuidado página 9

First Steps
Tools Necessary:
Phillips
or
3/8" Fixed
Wrench
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed,
from left to right or right to left, by moving the door hinges from one side to the
other. Reversing the door swing should be performed by a qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to "0" (Mechanical controls)
or "OFF" (Electronic controls) and remove the electrical power cord from the wall outlet.
Remove any food from door shelves.
Door removal and reversal instructions:
1. Remove toe grille.
2. Remove top hinge cover. Trace around
the hinge with a soft lead pencil. This
makes reinstallation easier. Remove
top hinge and lift door off center
hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable
wrench and save for reassembly. Ensure
plastic washer stays on hinge pin.
Head
TM
Top
Hinge
Cover
Top Hinge
9
Socket
Wrench Set
Top Hinge
Cover Front
Screw
Top
Hinge
Screw
4. Lift refrigerator door off of bottom
hinge and set aside.
5. Remove center hinge and shim by
removing inside screw and loosening two
outside screws enough to allow hinge
and shim to slide out. Tighten screws.
6. Loosen two outside screws on
opposite side of refrigerator, remove
inside screw and install center hinge.
Hinge
Hole
Plug
Adjustable
Wrench
or
Top Hinge
Cover Rear
Screw
Bottom
Hinge
Screw
Door
Door
Stop
Stop
Screw
Washer
Hinge
Shim
Pin
Center
Hinge
Screws
Handle
Hole
Plug