Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 - OPERATING THE KEYPAD
To use the channels "A", "B" or "C" (protected by numeric
combination) you must first perform programming as at section
7 followed by paragraph 8. To use channel "4" (does not need
numeric combination)you must follow programming as per
paragraph 10.
Once programmed at least one channel see section 11.
6 - MODIFYING THE MASTER PROGRAMMING
PASSWORD
The password is needed to enable the programming of channels
"A", "B" and "C" (section 7). We recommend that you customize
and communicate it to the person who will manage the facility
(see form at the end of the instruction manual where also it is
illustrated how to replace the batteries).
The default password is 1111.
If fixed horizontal and the sticker has been attached
(part A fig.2) the password is 3333.
Passwords created must have a minimum of 3 and
maximum of 8 numbers.
With the keyboard in
standby (see section 3)
press and keep pressed
the channels A and C
(
+
) keys until you
hear "3 BEEP"
Retype your new
password for
confirmation and press
Channel 4 key (
).The
keypad emits "3 BEEPS"
7 - CREATING OR MODIFING OF A
NUMERIC COMBINATION FOR CHANNEL
"A", "B" OR "C"
This procedure creates or changes a numeric combination that
can trigger channel "A", "B" or "C". As a internal programming
of the keyboard it is not necessary to be next to the receiver.
If you create (not change) a numeric combination for the first
time you must also do the procedure in paragraph 8 to operate
the system.
The combinations created are made up from 3 to 5
numbers
With the keyboard in
standby (see section 3)
press and keep pressed
the channels A and B
(
+
) keys until you
hear "3 BEEP"
The keypad emits a
long beep to indicate
that code has been
created / modified
If you already have a code combined to the selected
channel, it will be replaced
If you forget a combination combined to a channel
just repeat this procedure to create a new combination
Enter the existing
password to be
replaced and press
the channel D key (
)
The keypad emits
"3 BEEPS "
Enter your new password
and press
channel 4 (
).
The keypad emits
"3 BEEPS "
Enter the master
programmino password
(see section 6) and
press the D key (
).
The keypad emitts
3 beeps.
Enter the desided
numeric combination
followed by the selected
channel (eg:12345
)
8 - ENTERING A NUMERIC COMBINATION
ON CONTROL UNIT / RECEIVER
It is recommended to memorize the codes before
mounting the keypad, in order to be within reach of the
receiver card and verify the cose reception.
Activate the receiver that
you want to program
(read instruction
manuals accordingly)
Deactivate the receiver where you have
memorized the keypad codes
(read the related instruction manual)
9 - CANCELLING A NUMERICAL COMBINATION TO A
SPECIFIC CHANNEL
With the keyboard in
standby (see section 3)
press and keep pressed
the channels B and C
(
+
) keys until you
hear "3 BEEP"
The keypad emits
three beeps to indicate
that it has deleted the
numeric combination
10 - MEMORIZING A CODE IN
CHANNEL 4
Activate the receiver
that you want to
program
(read instruction
manuals accordingly)
Deactivate the receiver where you have memorized the
keypad codes (read the related instruction manual)
11 - USING THE KEYPAD
Once programmed the code and channel for activation type in
programmed code a relative channel (ex. 12345
desire to activate the receiver with channel 4 (
to press the relative key (no code is required).
12 - DELETING ALL THE CODES
To clear the memorized codes you must reset the receiver
memory in which you have memorized the codes (read related
instruction manual).
Press the memorized
code and the
corresponding channel
(see paragraph 7)
(Eg 12345
)
Enter the master
programmino password
(see section 6) and
press the D key (
).
The keypad emitts
3 beeps.
Press the channel you
want to delete
("A", "B" or "C")
Press
channel 4 (
)
(see fig.5)
). If you
) you just need
Tabla de contenido
