Hkoenig AXO940 Manual De Usuario página 8

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Figure (10)
It is usually necessary to clean and replace the filters for motor only after they have been used for
6 months to 12 months. Please remember to confirm that all filters have been correctly installed
into the machine before turning on the cleaner to use.
Key Points:
The power supply of the cleaner must be cut off before replacing any filter!
Faults and repair
In case of abnormality with this product, please treat it in the way as stated hereinafter; if the
cleaner still refuses to work normally, please contact the stop from where this product was bought
or with the appointed service point.
Fault
The cleaner cannot
operate.
The suction force is
reduced.
There is abnormal
sound when the
motor is under
operation.
After-sale service
When abnormalities or problems are found with the product in use, please contact the appointed
service point for consultation or repair.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a separation of
this waste product into communities, you will need to inform your local authorities about the places
where you can return this product. In fact, electrical and electronic products contain hazardous
substances that have harmful effects on the environment or human health and should be recycled.
The symbol here indicates that electrical and electronic equipment should be chosen carefully, a
wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com
1. Check whether the power plug is inserted securely; pull out the
plug and then reinsert it in the power socket;
2. Check whether the power socket is electrified;
3. Check whether the switch of the cleaner is in "ON" position.
1. Check whether the floor brush, the hose and the spile are
jammed, and remove any blockage immediately;
2. Check whether the air-inlet filter gauze is dusty; frequently
clean rubbish or replace air-inlet and air-outlet HEPA;
1. Stop the cleaner immediately;
2. Check whether the floor brush, the hose and the spile are
jammed, and remove any blockage immediately.
-
Figure (11)
Treatment
-
- Tél: +33 1 64 67 00 01
Tabla de contenido
loading

Tabla de contenido