Assemble Hood; Stroller Operation; Adjust Backrest Angle; Use Buckle - Jole brisk Manual De Instrucciones

Assemble Hood

Insert the hood pivots into hood mounts to assemble the hood
8
to backrest.
The completely assembled stroller is shown as 9

Stroller Operation

Adjust Backrest Angle

The Backrest has 5 angles.
!
Make sure the backrest angle is set properly for use.
Recline Backrest
- 1
Squeeze the adjust button , and then adjust the backrest to a desired angle.
10
Raise Backrest
Just push to raise the backrest.

Use Buckle

Release Buckle
Press the center button to release the buckle. 11
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A click sound means the buckle is locked completely.
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child's neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
13 Shoulder harness anchor A
- 2
13 Shoulder harness anchor B
- 3
13 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
Use slide adjuster to change the harness length.
- 2
Press the button 15 , while pulling the waist harness to proper length

Adjust Calf Support

Raise Calf Support
To raise the calf support, just push it upwards.
15
7 , and stick the velcros to attach the rear hood
.
- 2
10
- 1 - 2
12 , and click into the center buckle. 12
- 3
12
14
- 1
15
- 3
15 .
Lower Calf Support
Press the adjustment buttons on both sides of the calf support

Use Front Swivel Lock

Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.

Use Brake

To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
The brake must be engaged when placing and removing children.
Tip Always apply brake when stroller is in stopped position. To ensure brake is fully engaged, gently rock
the stroller backwards and forwards before releasing the handle.
Tip Clean brake system regularly to ensure fully functional. See care and maintenance section.

Use Hood

To open the hood, pull hood forwards and press stretchers down on both sides.
To fold the hood, pull up the stretchers on both sides

Fold Stroller

20 - 1
Press the folding button and rotate the folding handle upwards
20 - 3
. Lock the stroller by tucking storage latch onto the storage mount
locked completely. 21

Use Carry Strap

You can carry the stroller with ease by lifting the carry strap.

Accessories

Accessories may be sold separately or may not be available depending on region.
Use with Joie Child restraint
Not all accessories are included on some models. When using with Joie infant child restraint gemm, i-Snug
please refer to the following instructions.
!
Adjust the backrest to the lowest position.
!
If you have any problems about using the child restraint, please refer to their own instruction manuals.
! Please don't fold stroller when attaching the child restraint.
Models can be
used with Gemm, i-Snug
S1102Axxxx000 V
S1102Dxxxx000 V
S1102Gxxxx000 V
S1102Cxxxx000 X
S1102Exxxx000 X
S1102Fxxxx000 X
S1102Hxxxx000 X
- 1
, and rotate the calf support downwards.
16
17
18
19
19 - 1
and pull hood toward back.
20 - 2
, push the stroller forward to fold
21 - 1
, then the stroller is folded and
22
- 2
16
16