PR electronic 9116B-EMP Manual Del Producto página 41

LERBAKKEN 10, 8410 ROENDE DENMARK
Module 9116B1
Terminal 51-52, 51-53
Ui, Vmax 30 V
Ii, Imax 120 mA
Pi 900 mW
Ci 3 nF
Li 1 μH
Module 9116B1
Group
Terminal 51-54, 52-54
Uo, Voc 28 V
IIC or A,B
Io, Isc 93 mA
IIB or C,E,F
Po 650 mW
IIA or D,G
Module 9116B1
Group
Terminal 51-53
Uo, Voc 28 V
IIC or A,B
Io, Isc 1.1 mA
IIB or C,E,F
Po 8 mW
IIA or D,G
Module 9116B1
Group
Terminal 51-52
Uo, Voc 8.3 V
IIC or A,B
Io, Isc 0.2 mA
IIB or C,E,F
Po 0.4 mW
IIA or D,G
Module 9116B1
Group
Terminal 41,42,43,44
Uo, Voc 8.3 V
IIC or A,B
Io, Isc 13.1 mA
IIB or C,E,F
Po 27.3 mW
IIA or D,G
Installation notes:
The installation and wiring shall be in accordance with the Canadian Electrical Code for Canada and
National Electrical Code NFPA 70, Article 500 or 505 for installation in USA.
The module must be supplied from a Power Supply having double or reinforced insulation.
The use of stranded wires is not permitted for mains wiring except when wires are fitted with cable ends.
For installation on the 9400 Power Rail the power must be supplied from Power Control Module Unit 9410.
Install in pollution degree 2 or better, overvoltage category I or II.
The module must be installed in an enclosure suitable for the environment for which it is used.
In Class I, Division 2 /Zone 2 installations, the subject equipment shall be mounted within a tool-secured
enclosure which is capable of accepting one or more of the Class I, Division 2 wiring methods specified in
the National Electrical Code for USA or the Canadian Electrical Code for Canada
The module is galvanic isolated and does not require grounding.
Use 60 / 75 ºC Copper Conductors with wire Size AWG: (26-14).
Warning: Substitution of components may impair intrinsic safety.
Warning: To prevent ignition of the explosive atmospheres, disconnect power before servicing and do not
separate connectors when energized and an explosive gas mixture is present.
Warning: Do not mount or remove modules from the Power Rail when an explosive gas mixture is present.
Revision date:
2012-06-08
Co Lo Lo/Ro
80 nF 4 mH 54 μH/Ω
640 nF 16 mH 218 μH/Ω
2.1 μF 32 mH 436 μH/Ω
Co Lo Lo/Ro
80 nF 1000 mH 4 mH/Ω
640 nF 1000 mH 17 mH/Ω
2.1 μF 1000 mH 35 mH/Ω
Co Lo Lo/Ro
7 μF 1000 mH 100 mH/Ω
73 μF 1000 mH 400 mH/Ω
1000 μF 1000 mH 800 mH/Ω
Co Lo Lo/Ro
7 μF 207 mH 1 mH/Ω
73 μF 828 mH 5 mH/Ω
1000 μF 1000 mH 10 mH/Ω
Version Revision
V6 R0
9116B-EMP - Versión del producto 9116-003
Module 9116B2
Terminal 51-52, 51-53
Ui, Vmax 30 V
Ii, Imax 120 mA
Pi 900 mW
Ci 3 nF
Li 1 μH
Module 9116B2
Group
Terminal 51-54, 52-54
Uo, Voc 21.4 V
IIC or A,B
Io, Isc 93 mA
IIB or C,E,F
Po 650 mW
IIA or D,G
Module 9116B2
Group
Terminal 51-53
Uo, Voc 21.4 V
IIC or A,B
Io, Isc 1.1 mA
IIB or C,E,F
Po 8 mW
IIA or D,G
Module 9116B2
Group
Terminal 51-52
Uo, Voc 8.3 V
IIC or A,B
Io, Isc 0.2 mA
IIB or C,E,F
Po 0.4 mW
IIA or D,G
Module 9116B2
Group
Terminal 41,42,43,44
Uo, Voc 8.3 V
IIC or A,B
Io, Isc 13.1 mA
IIB or C,E,F
Po 27.3 mW
IIA or D,G
Prepared by:
PB
9116QF01
Co Lo Lo/Ro
0.16 μF 4 mH 54 μH/Ω
1.13 μF 16 mH 218 μH/Ω
4.15 μF 32 mH 436 μH/Ω
Co Lo Lo/Ro
0.16 μF 1000 mH 4 mH/Ω
1.13 μF 1000 mH 17 mH/Ω
4.15 μF 1000 mH 35 mH/Ω
Co Lo Lo/Ro
7 μF 1000 mH 100 mH/Ω
73 μF 1000 mH 400 mH/Ω
1000 μF 1000 mH 800 mH/Ω
Co Lo Lo/Ro
7 μF 207 mH 1 mH/Ω
73 μF 828 mH 5 mH/Ω
1000 μF 1000 mH 10 mH/Ω
Page:
2/4
41