Operation - Gardena 1197 Manual De Instrucciones

1197-20.960.02_18.11.2011_GARDENA.qxp 22.11.2011 12:17 Seite 12
8
7
3

5. Operation

Set open outlet on
the Water Distributor :
A
With Water Computer :
12
Outlet side :
8
2 to 6 outlets may be used. Outlets 1 and 2 must always be
used. The outlets 3 to 6 can be switched on using the flow
8
levers . 5 Tap Connectors
Outlets not being used must be closed with an end cap
Setting flow lever On / Off :
1. Open protection cover
9
2. Set flow levers
(e.g. 3 and 4) on On.
3. Set flow levers
(e.g. 5 and 6) on Off.
4. Close protection cover
Connect used / not-used outlets :
1. Screw Tap Connectors
2. Close not-used outlets (e.g. 5 and 6) with end caps
3. Connect used outlets 1 to 4 with the devices.
Important :
The flow levers (On / Off) must match up with the outlets
(used / not-used).
The programme numbers of the Water Computer must match
up with the outlets in use.
Behind the viewing window
shown. If irrigation is to be done (manually) through a different
outlet, or if the open outlet does not match up with the pro-
gramme of the Water Computer, the desired open outlet can be
selected with the dial disc
v Press dial disc
shown in the viewing window
0
When using a GARDENA Water Computer Art. 1864 / 1866,
"Programme 15" (Art. 1814 "Special programme") should be
used. Here, the 5 min. pause between programmes required
for secure further switching is automatically considered.
1. Set the programmes (irrigation times) for the outlets in use.
2. Press dial disc
matches the desired programme of the Water Computer.
3
and 3 end caps
9
.
8
for used outlets
8
for not-used outlets
9
and lock-in.
3
onto the used outlets (e.g. 1 to 4).
0
, the currently open outlet is
A
.
A
until the desired open outlet (e.g. 3) is
0
.
A
until the open outlet in the viewing window
7
are included.
7
.
7
.
0