Caution:
Always place the appliance on a dry
and flat surface. Please ensure that
there is enough water in the tank when
warming food. If a bottle or other con-
tainer is inserted, the water tank must
be completely filled with water.
The time for heating can be longer or
shorter, depending on the contents,
amount and the type of container, the
starting temperature of the water and
the ambient temperature.
Symbols:
Appliance is switched off
Warming of milk bottles and
baby jars
Warming of milk bottles
and small baby jars
Warming of large
baby jars
5. Warming of baby jars:
The appliance also permits quick, reliable and automatic heating of jar food. The water is heated by a hotplate in
the bottom of the appliance, which transfers its heat to the jar to be warmed.
Starting up
Before heating, please remove the label of the baby jar to prevent it coming
off during the warming procedure and then becoming stuck to the inside
of the water tank of the baby food warmer. Remove the lid of the baby jar
before you put the jar into the appliance.
Place the jar in the baby food warmer and fill the water tank with water up to
about 1 cm from the top edge of the tank.
Use the rotary switch (c) at the front of the appliance to set the desired
temperature range. The red operating light (b) lights up.
The optimal temperature is reached after 8 to 10 minutes and the operating light (b) goes off. We
recommend stirring the food regularly to distribute the heat evenly.
Remove the jar from the baby food warmer and turn the rotary switch (c) for
the adjustment of the temperature back to the Off position at the end of the
warming procedure. Unplug the appliance from the socket and pour the water
out of the baby food warmer.
Caution: Before you give the food to the child, you must first check the temperature of the contents.
Please keep the receipt, instructions for use and the article number in a safe place. Warranty claims or claims related
to warranty promises are only handled by the dealer.
- 8 -