LawnMaster CLHT2218B01 Manual Del Operario página 10

ASSEMBLY
Charging the Battery (See figs 4 - 5)
The battery pack for this product has been shipped in a low charge condition.
Charge it fully before first use.
WARNING! Always remove the battery pack from the product
for charging! Charge in a safe location away from moisture,
heat or any hazard to the charger or other danger!
Align the battery pack to the slots on the charger and slide it in until it
locks in place (Fig. 4, 5).
Connect the charger to the power supply.
WARNING! Check the voltage and current! The voltage and
current must comply with the information on the rating label!
Allow sufficient charging time (see technical data), and then disconnect the
charger from the power supply.
Press the release button on the battery pack and remove it from the charger.
NOTE: It is normal for the battery pack and charger to become
warm (but not hot) during charging process. If the battery does
not charge properly, check to make sure the electrical outlet
is "live".
WARNING! Always charge the battery before storage!
To reduce risk of fire, never leave the battery connected with
the charger for more than 24 hours!
Fig. 4
10
Fig. 5