Log - Laerdal VitalSim Instrucciones De Uso

Set lung blockage
- On the main display highlight the airway functional area
and then the desired function.
- Press OK to activate the Airway menu or select the desired
airway open, left/right or both lungs blocked using the quick
execution buttons.
- When both lungs are blocked the breathing rate will set to 0.

Log

The top section of the main functional area controls log and
scenario.
The VitalSim automatically generates a log of events from the
moment the unit is turned on. Elapsed time and name for the
current log is displayed in the upper left corner of the display.
Unless saved, the log will be erased when the base unit is
turned off. The Log / Scenario section have controls for Pause
and Resume, Restart and Save logs. In addition it is possible to
log manual events from the remote control.
Saved logs can be retrieved later using the VitalSim PC utility
program. Logs can be transferred to the PC for permanent
storage, additional comments and printing.
Log Controls
On the main display; using the left / right navigation buttons hig-
hlight the Log functional area.
Press OK to activate the Log Control menu or select functions
directly from quick execution buttons.
Pause: Stops the clock. Any events or changes in settings
will not be logged. Resume logging and clock.
Restart: Restart the log. Erase current log.
Save Log. Saves the current log. Log is given a default name by
VitalSim, Logxx, where xx is a sequential number.This name can
be modified, using the
button and the alphanumeric buttons.
Up to 25 logs can be saved. Logs are erased when
transferred to a PC, or they can be erased using
the Clear All Logs function.
backspace quick execution
15