How To Use - Metabo HPT R 18DSAL Manual De Instrucciones

English

HOW TO USE

WARNING
○ To prevent accidents when installing or
removing the rechargeable battery, make
sure that the appliance is switched off .
○ This cleaner is only dry dust. Do not
vacuum water or other liquids.
CAUTION
○ Make sure that the rechargeable battery is
properly installed. If not properly installed,
the battery may fall out, causing injury.
○ Make sure the fi lter and pre fi lter is installed
when operating the appliance. Failure to
do so may result in injury or malfunction.
1. Verify the fi lter (Fig. 12)
Check to make sure the fi lter is installed.
Pre Filter
Filter
2. Attach the nozzle (Fig. 13)
Depending on the operation, insert the
nozzle to the intake port of the appliance. The
appliance can be used without a nozzle.
Extension Pipe
Nozzle
14
Dust Case
Fig. 12
Fig. 13
NOTE
When attaching the nozzle or extension pipe,
insert as you twist in the direction indicated by
the arrow. (Fig. 14)
Nozzle and
Extension Pipe Detach
Twist
Direction Insert Dust Case
Twist in the direction indicated by the arrow
when detaching as well.
Twisting in the opposite direction could result in
detaching the dust case from the housing.
3. Install the battery (Fig. 15)
As shown in the diagram below, fi rmly insert
until a click is heard.
Fig. 15
4. Switch on the appliance (Fig. 16)
When the switch is pulled, the appliance and
the LED light are both activated. Release the
switch and the appliance and LED light are
both shut off .
LED light
Housing
Fig. 14
Battery
Firmly insert
Switch
Fig. 16