Tabla de contenido
KRI (fornito separatamente)
Ricevitore per telecomando completo
di cavo per collegamento alla scheda
elettronica CMS.
KRIM (fornito separatamente)
Ricevitore per telecomando completo
di cavo per collegamento alla scheda
elettronica CMS.
INTERFACCE SERIALI PER
CONTROLLI EVOLUTI
KISI (fornito separatamente)
Interfaccia seriale CAN-bus (Controller
Area Network) per sistema iDRHOSS,
indispensabile per il collegamento in
rete delle unità ed il loro indirizzamento
seriale, da associarsi alla scheda elet-
tronica KCMS (Protocollo Can-Open).
KRS485 (fornito separatamente)
Interfaccia seriale RS485 per dialogo
logico con building automation e siste-
mi di supervisione, da associarsi alla
scheda elettronica KCMS, (Protocol-
li supportati: protocollo proprietario;
ModBuS® RTU).
CONVERTITORI SERIALI
KUSB (fornito separatamente)
Convertitore seriale RS485/USB per il
collegamento a sistemi di supervisio-
ne, da associarsi a uno o più moduli di
interfaccia seriale KRS485 nel caso di
gestione centralizzata delle unità.
KGTW-BAC (fornito separatamente)
spositivi.
KGTW-LON (fornito separatamente)
Gateway
RS485/FTT10-LonWorks,
KRI (supplied separately)
Receiver for remote control with ca-
ble for connection to the circuit board
CMS.
KRIM (supplied separately)
Receiver for remote control with ca-
ble for connection to the circuit board
CMS.
SERIAL INTERFACE FOR
ADVANCED
KISI (supplied separately)
iDRHOSS CAN-bus serial interface
(Controller Area Network, indispen-
sable for the network connection of
the units and their serial addressing,
which are to be associated with the
KCMS electronic board (Can-Open
Protocol).
KRS485 (supplied separately)
RS485 serial interface for logical dia-
logue with building automation and
supervision systems, which is to be
associated with the KCMS electronic
board (Supported protocols: proprie-
tary protocol; ModBuS ® RTU).
SERIAL CONVERTERS
KUSB (supplied separately)
RS485/USB serial converter to con-
nect to supervisory systems and must
be associated to one or more KRS485
serial interface modules in the case of
centralised management of the units.
KGTW-BAC (supplied separately)
-
Gateway RS485/BACnet, up to 64
devices.
KGTW-LON (supplied separately)
Gateway
RS485/FTT10-LonWorks,
up to 64 devices.
58
KRI (fourni séparément)
Récepteur pour la télécommande avec
le câble pour la connexion à la carte de
circuit imprimé CMS.
KRIM (fourni séparément)
Récepteur pour la télécommande avec
le câble pour la connexion à la carte de
circuit imprimé CMS.
INTERFACES SÉRIES POUR
CONTRÔLES ÉVOLUÉS
KISI (fourni séparément)
Interface port série CAN-bus (Controller
Area Network) pour système iDRHOSS,
indispensable pour la connexion au rése-
au des unités et de leur adresse port
série, à associer à la carte électronique
KCMS (Protocole Can-Open).
KRS485 (fourni séparément)
Interface port série RS485 pour dialo-
gue logique avec building automation et
systèmes de supervision, à associer à
la carte électronique KCMS, (Protoco-
les supportés : protocole propriétaire ;
Modbus® RTU).
CONVERTISSEURS SÉRIELS
KUSB (fourni séparément)
Convertisseur port série RS485/USB
pour la connexion au système de super-
vision, à associer à un ou plusieurs mo-
dules d'interface port série KRS485 si la
gestion de l'unité est centralisée.
KGTW-BAC (fourni séparément)
Passerelle RS485/BACnet, jusqu'à 64
appareils.
KGTW-LON (fourni séparément)
Passerelle
RS485/FTT10-LonWorks,
jusqu'à 64 appareils.
Tabla de contenido
