Tabla de contenido
Symptom
Air leak near top of tool or in
trigger area
Tool does nothing or operates
sluggishly
Air leak near bottom of tool
Tool jams frequently
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the tool better and safer.
Read operator's manual: To reduce the risk of injury, user must read and
.
understand operator's manual before using this product.
Risk to hearing: Always wear ear protection when using this tool. Failure to do so
.
may result in hearing loss.
Eye protection: Always wear safety goggles, safety glasses with side shields, or a
.
full face shield when operating this product.
Risk of serious personal injury: Never place hands or any other body parts in
.
the fastener discharge area of the nailer. The tool might eject a fastener and could
.
result in death or serious personal injury.
Possible Cause(s)
Loose screws
Worn or damaged O-rings or seals
Inadequate air supply
Worn or damaged O-rings or seals
Loose screws
Worn or damaged O-rings or
Incorrect fasteners
Bent
fasteners
Magazine or nose screw loose
Dirty
magazine
Piston is broken or worn
6
Corrective Action
Tighten screws
Install overhaul kit
Check screws
Install overhaul kit
Tighten screws
seals
Install overhaul kit
Verify fasteners of correct size
Replace with
the right
Tighten screws
Clean
magazine
Replace the piston
fasteners
.
Tabla de contenido
