ZIEHL-ABEGG ZA top SM250.60B Instrucciones De Uso página 69

Instrucciones de uso originales
ZAtop – series de tipo SM250.60B
Bases de la prueba:
Plano de construcción: A-25-121-0045 índice A04 del 20.03.2018
Materiales del eje admi-
sibles:
Materiales admisibles
cubo de la polea de
tracción:
Materiales admisibles
muelle de ajuste polea
de tracción:
Materiales admisibles
rotor del freno:
A-TBA20_02-E 2032 Index 003
DIN 743-1:2012-12 Calculation of load capacity of shafts and axles –
Part 1: General
DIN 743-2:2012-12 Calculation of load capacity of shafts and axles –
Part 2: Theoretical stress concentration factors and
fatigue notch factors
DIN 743-3:2012-12 Calculation of load capacity of shafts and axles –
Part 3: Strenght of materials
DIN 743-3 Calculation of load capacity of shafts and axles –
Corrigendum 1:2014- Part 3: Strenght of materials,
12 Corrigendum to DIN 743-3:2012-12
DIN 743-4:2012-12 Calculation of load capacity of shafts and axles –
Part 4: Fatique limit, endurance limit – Equivalently
damaging continuous stress
DIN 6892:2012-08 Drive type fastenings without taper action –
Parallel keys – Calculation and design
DIN 6892 Drive type fastenings without taper action –
Corrigendum 1:2014- Parallel keys – Calculation and design,
05 Corrigendum to DIN 6892:2012-08
DIN 5466-1:2000-10 Splined joints, calculation of load capacity –
Part 1: General basis
FKM-Guideline 2012 Analytical strength assessment of mechanical com-
ponents
Acero DIN EN 10083-3:2007-01 – 42CrMo4+QT (1.7225+QT)
Acero DIN EN 10083-3:2007-01 – 42CrMoS4+QT (1.7227+QT)
Acero DIN EN 10083-3:2007-01 – 50CrMo4+QT (1.7228+QT)
Acero DIN EN 10083-2:2006-10 – C45+N (1.0503+N)
Hierro colado DIN EN 1561:2012-01 – EN-GJL-300 (GG-30)
Acero DIN EN 10083-3:2007-01 – 42CrMo4+QT (1.7225+QT)
DIN EN 1706:2013-12 AC-AlZn10Si8Mg (AC71100)
Resistencia a la tracción R
Nro. de art. 01013399-E (EU-BD 783)
69/72
2
= 210 N/mm
eN
Anexo