Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING
1)
Do not use MXPOWER surge protectors outdoors or where excessive
moisture is present. Use indoors only and in a dry location.
2)
Do not install MXPOWER surge protectors near heat-emitting appliances
such as radiators or heat registers.
3)
Do not plug in any kind of extension cord or power bar to your MXPOWER
surge protector, nor should you plug any 2-prong, non-grounded adapters
to your MXPOWER.
4)
Do not use MXPOWER surge protectors with loads rated above the current limit
of the surge protector (15 A, 20 A or 30 A). MXPOWER products are intended
for equipment wired according to applicable electrical code.
CAUTION
Risk of Electric Shock. Do not install MXPOWER surge protectors
if there are not at least 10 meters (30 feet) or more of wire between
the electrical outlet and the electrical service panel.
IMPORTANT
In order to protect your equipment and preserve your product warranty,
MXPOWER surge protectors must be plugged into a properly grounded,
3-wire outlet that conforms to applicable NEC (USA) or CEC (Canada)
codes. If your surge protector indicates that your outlet is not grounded,
do not use the product. Call an electrician to correct the wiring
in the building or outlet. It is not uncommon for a building to be
improperly grounded.
FEATURES
Designed to protect multifunctional copiers, printers, scanners, servers, computers
and networked equipment, MXPOWER products provide reliable protection against
major power disturbances that can cause disruption, degradation or destruction
to office equipment.
MXPOWER Surge Protectors unique features:
Patented Five-Stage X3 MOV Technology to ensure longer
•
equipment lifespan;
Smart Controller to measure real-time current and voltage;
•
Symmetrical High-Performance EMI Filtering to suppress noise
•
and improve operating performance.
INTRODUCTION
120 V 15 A and 20 A
1.
L-N OK: Indicates if the protection is in effect.
2.
GND OK: Indicates if the outlet is properly wired and grounded.
3.
OV / UV FLT: Indicates if the input voltage is outside the safe limits.
4.
OC FLT: Indicates if an over-current event occurred.
5.
Real-Time Load & Voltage Display.
1 2 3 4
5
Tabla de contenido
